Robust Process Development and Scientific Molding

Theory and Practice

USD 169.99 (Print)

incl. taxes, plus possibly shipping costs

published
€139.99 (Print)

incl. taxes, plus possibly shipping costs

published
€139.99 (PDF)

published

€139.99 (ePub)

published

Description
Robust Process Development and Scientific Molding
The book introduces the reader to the concepts of Scientific Molding and Scientific Processing for Injection Molding, geared towards developing a robust, repeatable, and reproducible (3Rs) molding process.

The effects of polymer morphology, thermal transitions, drying, and rheology on the injection molding process are explained in detail. The development of a robust molding process is broken down into two sections and is described as the Cosmetic Process and the Dimensional Process. Scientific molding procedures to establish a 3R process are provided.

The concept of Design of Experiments (DOEs) for and in injection molding is explained, providing an insight into the cosmetic and dimensional process windows. A plan to release qualified molds into production with troubleshooting tips is also provided. Topics that impact a robust process such as the use of regrind, mold cooling, and venting are also described.

Readers will be able to utilize the knowledge gained from the book in their day-to-day operations immediately.

The second edition includes a completely new chapter on Quality Concepts, as well as much additional material throughout the book, covering fountain flow, factors affecting post mold shrinkage, and factor selections for DOEs. There are also further explanations on several topics, such as in-mold rheology curves, cavity imbalances, intensification ratios, gate seal studies, holding time optimization of hot runner molds, valve gated molds, and parts with large gates. A troubleshooting guide for common molded defects is also provided.
Robust Process Development and Scientific Molding
The book introduces the reader to the concepts of Scientific Molding and Scientific Processing for Injection Molding, geared towards developing a robust, repeatable, and reproducible (3Rs) molding process.

The effects of polymer morphology, thermal transitions, drying, and rheology on the injection molding process are explained in detail. The development of a robust molding process is broken down into two sections and is described as the Cosmetic Process and the Dimensional Process. Scientific molding procedures to establish a 3R process are provided.

The concept of Design of Experiments (DOEs) for and in injection molding is explained, providing an insight into the cosmetic and dimensional process windows. A plan to release qualified molds into production with troubleshooting tips is also provided. Topics that impact a robust process such as the use of regrind, mold cooling, and venting are also described.

Readers will be able to utilize the knowledge gained from the book in their day-to-day operations immediately.

The second edition includes a completely new chapter on Quality Concepts, as well as much additional material throughout the book, covering fountain flow, factors affecting post mold shrinkage, and factor selections for DOEs. There are also further explanations on several topics, such as in-mold rheology curves, cavity imbalances, intensification ratios, gate seal studies, holding time optimization of hot runner molds, valve gated molds, and parts with large gates. A troubleshooting guide for common molded defects is also provided.
Customer evaluation for "Robust Process Development and Scientific Molding"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Author Info

Suhas Kulkarni is the President of FIMMTECH, a consulting firm that specializes in services related to injection molding. He earned his Masters in Plastics Engineering from the University of Massachusetts, Lowell and a Bachelors in Polymer Engineering from the University of Poona, India. He has over 28 years of experience as a process engineer.

Suhas Kulkarni is the President of FIMMTECH, a consulting firm that specializes in services related to injection molding. He earned his Masters in Plastics Engineering from the University of Massachusetts, Lowell and a Bachelors in Polymer Engineering from the University of Poona, India. He has over 28 years of experience as a process engineer.